 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| T-1 3/4 (5mm) SOLID STATE LAMP WP7113IT HIGH EFFICIENCY RED Features LOW POWER CONSUMPTION. POPULAR T-1 3/4 DIAMETER PACKAGE. GENERAL PURPOSE LEADS. RELIABLE AND RUGGED. LONG LIFE - SOLID STATE RELIABILITY. AVAILABLE ON TAPE AND REEL. RoHS COMPLIANT. Description The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAF2407 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: APR/19/2005 DRAWN: Y.W.WANG PAGE: 1 OF 4 ERP:1101005055 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 10mA Min. WP7113IT HIGH EFFICIENCY RED (GaAsP/GaP) RED TRANSPARENT 28 Typ. 80 Viewing Angle 21/2 20 Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25C Symbol peak D 1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device High Efficiency Red High Efficiency Red High Efficiency Red High Efficiency Red High Efficiency Red High Efficiency Red Typ. 627 625 45 15 2.0 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Lead Solder Temperature [2] Lead Solder Temperature [3] Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. High Efficiency Red 105 30 160 5 -40C To +85C 260C For 3 Seconds 260C For 5 Seconds Units mW mA mA V SPEC NO: DSAF2407 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: APR/19/2005 DRAWN: Y.W.WANG PAGE: 2 OF 4 ERP:1101005055 High Efficiency Red WP7113IT SPEC NO: DSAF2407 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: APR/19/2005 DRAWN: Y.W.WANG PAGE: 3 OF 4 ERP:1101005055 PACKING & LABEL SPECIFICATIONS WP7113IT Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAF2407 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: APR/19/2005 DRAWN: Y.W.WANG PAGE: 4 OF 4 ERP:1101005055 |
Price & Availability of WP7113IT
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |